Realizing Big Data for IIoT via Remote I/O with SNMP and MQTT Protocols

Posted by Kari Grosser on May 23, 2018 10:00:00 AM

ADAM-6000_6200_eDM_banner

SNMP, the open standard protocol, is widely used for information management of IoT systems and MQTT (Message Queuing Telemetry Transport) is a publish/subscribe messaging protocol for constrained Internet of Things devices in low-bandwidth high-latency, or unreliable networks. 

ADAM-6000_6200_eDM_MQTT_title

How Can MQTT Benefit You?

Actively Publish MQTT Message

Advantech's ADAM can be set up to actively publish I/O data over MQTT messages. For analog Input, you can define a time interval for publishing data. For Digital Inputs, the module will publish on Change-of-State. 

Shorten Downtime with Alarm Event Notification

Advantech's ADAM is designed with alarm trigger mechanism with instant notice. The MQTT message will be published to the broker the moment the alarm condition is reached. 

Simplify Configuration for MQTT by ADAM.Net Utility

Via ADAM.Net utility, the complicated procedures of MQTT configurations can be simplified. The broker address, QoS (Qualification of Service), publish and subscribe topics all can be set up quickly. Users are able to integrate Advantech's ADAM to their MQTT applications in a short period of time. 

 

ADAM-6000_6200_eDM_SNMP_title

 

How Can SNMP Benefit You?

Simple Network Monitoring Solution 

The condition of facilities such as on/off status and device data can be monitored easily and efficiently on the network. Advantech's SNMP-enabled ADAM offers an excellent data acquisition solution in any large-scale system.

SNMP Trap to Notify Alarm Event

Advantech ADAM actively sends SNMP trap message to management site when alarm even is reached. From the SNMP trap, users can quickly identify the device location and alarm type, thus shortening the time to recover the alarm. 

 SNMP Trap to Notify Alarm Event

Advantech's ADAM actively sends SNMP trap message to management site when alarm event is reached. From the SNMP trap, users can quickly identify the device location and alarm type, thus shortening the time to recover the alarm. 

Reduce Implementation Cost with ADAM MIB File

ADAM MIB file is designed in standard form for SNMP, which makes it easy to be integrated with an existing IT NMS (Network's Management Software).

 

ADAM-6000_6200_eDM_item_titlebar

ADAM-6000 Series ADAM-6200 Series

 

 

Topics: Remote I/O

Subscribe to Email Updates

Recent Posts